SOLTEC - the professional power people 最後更新日期:2009年4月9日
http://www.soltec.com.tw
    産品 > 選配件 > Remote Power Manage 2
Remote Power Manager 2 is a network manageable, intelligent power control unit designed to provide control of power over 10 electrical devices per RPM2. This power nerve center gives you control over your electrical devices either through a network connection modem dial-up or a telephone. Once connected you can re-set, power up/down the devices, and much more...
Network Diagram:
Features:
Split unit, allowing flexible Rack Mount configuration.
JOG-dial with front LCD display.
Support 2 USB camera for Remote Monitoring.
Built in Temperature, Humidity and Volt usage.
Add on Water Level sensor, RF Smoke Sensor and
RF Motion Sensors(sold separetely)
Daisy-Chain 8 units to control a total of 80 devices.
30 Amps output at 115Vac, 15Amps output at 230Vac
Dual circuit breaker.
Support TCP/IP, SNMP, HTTP, SMTP, PPP, SNTP, TELNET protocol, USB 2.0 & 1.1
Connect using 10/100mbps Ethemet, modem dial-up or a phone.
Safe power up, down or rebooting from any land or cell phone.
Individually control each of the ten AC receptacles from anywhere in the world using standard Web Browser.
Remotely and individually reboots locked up servers.
Sequentially apply power to equipment.
Customized TRAP and E-mail notification.
Receive daily / event alerts.
Remote setup support, once an IP address is assigned, the unit can be setup remotely through telnet commands.
 
 
Specifications:
Phone Interface
One input and one output, RJ11.
Display
One LCD (dual lines).
ILink Interface
One output & one input, connect to UPS.
ENV Interface
One RJ11, connect to temperature / humidity / security / smoke sensor.
RS-232 interface
One RS232 port for PPP modem connection
Two additional RS232 ports for Daisy Chain.
LAN interface
10/100Mbsp, RJ45.
USB interface
Two USB port, support USB2.0 and USB1.1
Power Switch
One Touch (3 seconds), Jog Dial
Nominal Input Voltage
115Vac
230Vac
Input Frequency
50/60Hz full range.
50/60Hz full range.
Input Protection
30 Amps circuit breaker.
15 Amps circuit breaker.
Power Input Plug
One SR L5-30P.
One IEC320P.
Power Output Plug
Ten (10) L5-15R.
Ten (10) IEC320R.
Max Output capacity
30 Amps
15 Amps
Dimension(mm)
170 (L) x 440 (W) x 45 (H)
Web Interface for RPM2:
RPM2 Master Unit:
RPM2 Slave Unit: